Drift Tengoku — November 2006
An archive project by Flock MFGNew issue alerts →
About this issue
Bonnet design and modification take center stage, with carbon and FRP options, cooling comparisons, ducting, fitment, and DIY work. Other features cover a rear-wheel-drive GC8 Impreza conversion, Japanese drift builds, and American 240SX, RX-7, and 350Z projects.
Page 12 — English draft translation
I tried both arrangements and think handling is better without the driveshafts. Self-steering comes in more lightly, and the biggest advantage is being able to increase steering lock. If drifting is your priority, I would remove them without hesitation. You disassemble the shaft, retain its coupling section and close the housing, so it is not particularly difficult .
An axle differential accommodates different wheel speeds from side to side; a center differential controls torque distribution front to rear. There are two rear-wheel-drive conversion methods. One lets the center differential’s front output freewheel, so power is not transmitted to the front driveshafts: Watanabe Service’s drift center-differential approach. The other locks the center differential itself and prevents the output from reaching the front differential, using the STI center-lock LSD arrangement. Both give full rear-wheel drive, but each has its own characteristics. With DCCD, torque distribution can become front 35 : rear 65.
Many looks and grades! Subaru revised the cars every year and added special editions and limited models, making the grade structure rather confusing. Broadly, A and B are early models; C and D are middle-period models; subsequent versions are late models . Power rose from 240 to 260 hp during the middle period and reached 280 hp with Type D. WRX and STI versions differ substantially in intercoolers, turbos and power output.
The driveshafts designed for four-wheel drive are thin and weak enough that everyone says they will inevitably break. Every rear-wheel-drive owner brought spare shafts. Used/rebuilt units are available for around ¥15,000 each. STI offers reinforced driveshafts, but at ¥50,000 each, and designed on the assumption of four-wheel drive, even they apparently cannot eliminate the strength issue.
Captions and page details
The GC8—
Removing the driveshafts makes steering lighter and allows more steering lock. Returning to the original configuration is troublesome, and the cost is higher .
Pattern 1: rear-wheel-drive setup with the front driveshafts removed
It can evolve in any direction!
Now let us explain the rear-wheel-drive conversion methods and which parts can be swapped over. Even at ten years old, a GC8 is highly competitive. Once converted to rear-wheel drive, it makes sense to upgrade other components as they break and need repair. It suits beginners who want their car to progress along with their drifting skills.
GC8 drift project
There are rear-wheel-drive— [fragment]
—conversion—
—two different methods!
Miura, who favors removing the driveshafts
STI
Center-lock LSD: ¥57,750–¥78,759 [final price digits require source verification]. Subaru Tecnica International.
Removing the driveshafts is the ritual of turning an Impreza into a drift car!
0422-33-7848
Miura added a 3 mm washer to increase steering lock, giving slightly more lock than a standard PS13. Apparently the steering rack has fewer gear teeth than a Silvia’s; fitting a 4 mm washer caused a rack failure .
—becomes! [fragment]
Otani’s Version 4 Type RA has DCCD, Driver’s Control Center Differential, which adjusts front/rear torque distribution from 50:50 to 35:65. He says it is fine for sliding the rear a little, but difficult for transitions or long-distance slides. The Cusco Tarmac Gear fixes the torque split at 35:65 in cars without DCCD .
Rear driveshafts are—
Quickly returns to four-wheel drive; lower cost; easier installation. Steering lock cannot be increased .
Pattern 2
—consumable items [headline fragment]
I have not driven one with the shafts removed, so I cannot compare, but coming from four-wheel drive it does not feel particularly strange. It might feel heavy if you switched from a Silvia. Above all, retaining the shafts means it can be returned to four-wheel drive quickly . Four-wheel drive is strongest—
Rear-wheel-drive setup retaining the front driveshafts
—and because it is a wagon, I often go snowboarding in winter. In the snowy mountains— [continued]
Subaru quality!?
NRUN
1. The factory bonnet opens to 90 degrees
Remove the bonnet stay and insert it into a hole in the strut tower to hold the bonnet at 90 degrees. It was probably designed for easier servicing during rallying. One story says this avoids having to remove the bonnet and have the vehicle treated as accident-damaged [the article presents this as a rumor].
Sudo, who favors retaining the driveshafts
Watanabe Service drift center differential
¥48,000
Basic grade structure
Watanabe Service’s drift center differential allows the center differential’s front output to freewheel, so the driveshafts do not need to be removed. Wagon owner Sudo has placed in many drift contests with this arrangement.
0258-29-4970
Back to four-wheel drive for winter—
Watanabe Service [truncated label]
Subaru Technica specification [damaged grade label]
Lower-priced version
Standard specification
WRX
WRX Type RA; WRX SA; WRX STI Versions 1–6 [trailing grade text damaged]. A model: 1994; B model: 1995. C lasted two years: C1 in 1996 and C2 in 1997. [The following model-code sentence is damaged.]
2. Factory tilting number plate. The upper part is hinged, allowing the number plate to swing upward to a horizontal position and stay there. It is probably intended to help with bumper removal, but it is useful in various situations.
—and driving hard in the snowy mountains!
—through Type G [fragment]
The wagon’s model code is GF8 [opening wording damaged].
—R [damaged continuation].
The coupe debuted as Version 3 Type—
10