Drift Tengoku — November 2006

Drag a corner or click a page to turn it

An archive project by Flock MFGNew issue alerts →

/ 284

About this issue

Bonnet design and modification take center stage, with carbon and FRP options, cooling comparisons, ducting, fitment, and DIY work. Other features cover a rear-wheel-drive GC8 Impreza conversion, Japanese drift builds, and American 240SX, RX-7, and 350Z projects.

Browse all magazines

Page 31 — English draft translation

6.

Commentary by NEKO: Look at the temperatures at 85°C before the blower operates. The duct area is coolest of the three types, suggesting that the coupling fan efficiently exhausts the incoming air through the duct. The heat distribution also shows no heat pocket underneath. After starting the blower, the overall temperature outside the duct area is low. This results from hot air being exhausted from throughout the engine bay.

15.

Commentary by NEKO: Coolant temperature fell fastest because the rear ducts work effectively. Even a stock bonnet lets hot air escape below the windscreen; this is an effective location. When driving, stronger airflow strikes the windscreen and creates a suction effect there, so it may cool even better. One of the five central-duct steps is closed and creates a heat pocket. It is better to minimize trapped heat, including when stationary or cooling down. [The magazine’s historical test interpretation.]

23.

Commentary by NEKO: This type showed the greatest change between its two thermal images. Its ducts sit directly above the turbo and exhaust manifold, the biggest heat sources. In the 85°C image, escaping hot air heats the duct area. That is evidence that heat is leaving, so it is not necessarily a bad sign. With airflow, it differs from the other two types that push air out: flow over the bonnet pulls hot air out. The effect should increase at higher speed. [The magazine’s test interpretation.]

Captions and page details
4.

2 minutes

3.

Coolant temperature

2.

75°C

5.

A central duct helps lower coolant temperature! This is probably the classic bonnet-duct shape. Size and shape vary by manufacturer, but the purpose is to exhaust hot air after it passes through the radiator. Our sample was an M Sports bonnet, the most widely fitted among D1GP points scorers driving Silvias and 180SXs.

7.

For a central duct—

8.

—position and depth are the key!

10.

2 minutes

9.

Overall temperature is low

13.

Coolant temperature

12.

75°C

11.

Rear outlets play a major role! A recent trend is ducting both front and rear, with exhaust openings toward the back of the bonnet. D-MAX has open ducts, while Origin raises the rear edge to create a gap. Here we tested D-MAX’s nationally popular bonnet, which combines central and rear outlets.

14.

Air leaves at the rear too—

16.

—so it cools quickly!

17.

Heat exits through the rear duct

18.

2 minutes

22.

Coolant temperature

21.

75°C

20.

Lower engine-bay temperature to help lower coolant temperature!

19.

Ducts on both sides are designed to release heat effectively from the engine bay’s biggest heat sources: the turbo and exhaust manifold. Lowering engine-bay temperature is intended to help coolant temperature fall. We chose the Top Secret bonnet, the same type fitted to Miki’s 2005 D1GP championship car.

24.

Applying airflow quickly releases the heat!

25.

The hot area disappears

26.

29