Drift Tengoku — November 2006

Drag a corner or click a page to turn it

An archive project by Flock MFGNew issue alerts →

/ 284

About this issue

Bonnet design and modification take center stage, with carbon and FRP options, cooling comparisons, ducting, fitment, and DIY work. Other features cover a rear-wheel-drive GC8 Impreza conversion, Japanese drift builds, and American 240SX, RX-7, and 350Z projects.

Browse all magazines

Page 33 — English draft translation

11.

Before you casually swap bonnets, stop a moment! If you want the right look, pay attention to safety too. People change bonnets for different reasons—better cooling, appearance, or weight reduction—but a bonnet is an accessible part that can be replaced by undoing four bolts. That is precisely why we want you to choose one suited to your purpose and understand the risks of insufficient knowledge. We brought together three experts to discuss how to make proper use of an aero bonnet.

13.

[Continued] I cut a duct because I had changed the setup. There is no point simply using an aero bonnet intended for a Tourer V unchanged. Drift Tengoku: We hear rain coming through the ducts can cause various problems. What can you do about it? Takahashi: A customer who came to our shop recently had rainwater enter the engine bay through a duct, leaving the ABS unit badly rusted. The fan belt deteriorates faster too. Awaji: I have seen a car that would not start because of poor electrical connections. Ueno: On my D1 Soarer, the back of the bonnet is raised so heat from the whole bonnet area escapes at the rear. That also reduces concern about rainwater problems. But I think a large duct around the center of the bonnet would cool better. Takahashi: If you can see the engine bay through a duct, rain and debris can enter it. Fitting a cover over the duct is the only real countermeasure.

15.

Drift Tengoku: What do you think about weight reduction? Takahashi: I do not worry about the weight. Even if a 10-kilogram part becomes 5 kilograms, that changes only a few percent of a car weighing more than 1,500 kilograms, right? Would a bag or some luggage really change the way it drives? Awaji: The FD3S already has an aluminum bonnet from the factory, so even with FRP I am not thinking about saving weight. It is about the look and the openings. There is no point swapping to an FRP bonnet with the standard shape. Ueno: With a Skyline, using a factory GT-R aluminum bonnet lets you reduce weight safely.

17.

When it comes to Tourer V models in Kanagawa, this is the man. Despite his reputation as a styling leader, he only recently fitted an FRP bonnet. He chooses ducts for appearance, and once even installed an add-on duct backward. The second Kunny’s Chaser, which debuted at Suzuka, used a V-mounted intercooler for the first time. A deep bonnet duct was cut to suit it. The GOODLINE ducts on both sides are long-time favorites; he has even fitted them backward, disregarding cooling efficiency.

Captions and page details
2.

The experts discuss bonnets

1.

Bonnet modifications: ducts, lightness, and looks

3.

Here are the warning signs!

5.

Ueno of T&E × Takahashi of NIGHT WALKERS

4.

Using a lightweight bonnet

6.

Checks for safe, worry-free use. Check 1: FRP cracks and separation.

9.

ARC

10.

Hrdsspurt

7.

If the FRP is cracked or its bonded seam is separating, airflow while driving can make the damage spread until the bonnet splits apart. Repair may be possible, but because safety is compromised, replacement is the better choice. Check 2: cracks around the bonnet pins.

8.

Hard driving can cause cracks around the bonnet-pin mounting points. Do not assume everything is safe simply because bonnet pins are fitted; regularly check that the pins are securely mounted.

12.

Keumny

14.

Looks before cooling performance! Duct placement matters for appearance too!

16.

Kuniaki Takahashi

18.

Takahashi’s JZX90 and Awaji’s FD3S have their intercoolers and radiators in a V-mount arrangement. Few off-the-shelf bonnets for the Tourer V accommodate V-mounts, but many FD3S designs allow air to escape well even with a V-mount setup—

19.

or so it seems.

20.

31