Drift Tengoku — Legend of 180SX Vol.1, February 2015

Drag a corner or click a page to turn it

An archive project by Flock MFGNew issue alerts →

/ 146

About this issue

This special traces the Nissan 180SX through Japanese drift culture, from early Kyushu drivers and Yoshinori Koguchi’s landmark Ebisu runs to the revival of his car. It profiles influential drivers and their machines, recreates period builds, and covers 180SX tuning, buying advice, and specialist shops.

Browse all magazines

Page 104 — English draft translation

14.

No matter how carefully you inspect a car while it is parked, you cannot fully understand its condition. At minimum, start the engine and listen for unusual noises; a test drive is even better. Rattling under acceleration or deceleration can point to a driveshaft. If the steering wheel will not center, suspect the steering rack. A noise when boost comes on may indicate a turbo exhaust leak. Use all your senses to check carefully for noise, vibration, and unusual smells.

Captions and page details
1.

Suspension checks

2.

Given the car’s age, some wear is expected, but suspension-bushing deterioration is common. Reject parts with visible surface cracks. In particular, deterioration of the rear lower-arm boots can lead to hub trouble, so take care.

3.

The stock 180SX hub uses a four-lug pattern. Many cars have been converted to five lugs using the popular R32 calipers, but even if the hub has been replaced once, that alone is no reason to avoid the car. On a used car, assume coilovers are just a bonus.

4.

The seams in the strut-tower panels should have sealant. Many repaired accident cars have had the sealant removed and not restored. Check the underside frame too; a car missing sealant should be treated with caution.

6.

After the body and chassis, the interior is the next thing to inspect when choosing a used car. Ideally it should be clean and have all its parts. Some S13-series cars have tachometers or speedometers that stop working partway through their range, so check them carefully.

7.

Moldings and trim panels are still available as genuine parts for now, but prices rise every year and delivery can take a long time. If you buy a worn-out car thinking “I’ll fix it later,” you will definitely regret it.

8.

Exterior checks

5.

Interior checks

9.

Pay attention to these points during a test drive!

10.

GOODYEAR

12.

For an exterior inspection, first step back and look at the car as a whole. Walk around it and check overall left-right and front-rear balance and any distortion before examining small details.

11.

BRIDE

13.

The most basic used-car check is whether the gaps between exterior parts, called “panel gaps,” are even. Uneven gaps can indicate accident damage. At the front, focus on the fender-to-bumper gaps; at the rear, check the combination-lamp-to-bumper gaps.

17.

049-239-1955 · http://www.vipergt.net/

16.

With thanks to Viper, 643-2 Kujirai, Kawagoe, Saitama Prefecture

15.

103