Drift Tengoku — Legend of 180SX Vol.1, February 2015

Drag a corner or click a page to turn it

An archive project by Flock MFGNew issue alerts →

/ 146

About this issue

This special traces the Nissan 180SX through Japanese drift culture, from early Kyushu drivers and Yoshinori Koguchi’s landmark Ebisu runs to the revival of his car. It profiles influential drivers and their machines, recreates period builds, and covers 180SX tuning, buying advice, and specialist shops.

Browse all magazines

Page 91 — English draft translation

5.

Forged H-beam connecting rods — ¥82,080. Connecting rods transfer piston force to the crankshaft. High output requires strength, while efficient power transfer depends on balancing reciprocating mass. Tomei’s H-beam design combines strength and low weight. Separate purpose-made materials are used for the rod and cap to preserve the forging grain and achieve high rigidity. Fits SR20 with the stock crank and SR22.

25.

Tomei performs precision machining in-house, including resurfacing engine parts and machining combustion chambers, avoiding delays while work waits on outside vendors. That gives it a major advantage when speed matters, such as building race engines or developing parts. Tomei also archives data on every engine it assembles and releases; this helps identify problems and informs better parts development.

18.

EXPREME exhaust manifold — ¥69,120. The SR20DET turbo layout leaves very little distance between the exhaust ports and turbo. At the stock turbo location, equal-length runners can create an inefficient layout. Tomei tested and refined this stainless unequal-length manifold to outperform the factory unit across the rev range. A divider at the collector prevents exhaust interference, and it supports the factory EAI system. Gaskets, bolts and heat-shielding wrap are included.

Captions and page details
1.

Crankshaft

3.

SR22 forged stroker kit — ¥246,240 (91 mm stroke / full counterweight)

2.

The 91 mm long-stroke crankshaft is the core of Tomei’s SR22 stroker kit. Its full-counterweight design balances inertia, reduces friction and vibration, and shapes the weights to reduce oil and air churning resistance. It is hot-forged from SMC435 chrome-moly steel and is twice as strong as a billet-machined crank.

4.

Connecting rod

6.

EXPREME outlet pipe

9.

ARMS

11.

Tomei

14.

ARMS

12.

Tomei

13.

E1120

8.

Turbocharger

20.

ARMS

22.

Two models are available for the SR20DET: M7960 and M8270. Both use an actuator. The turbo shaft is supported by floating metal bearings, allowing smooth operation from low to high rpm.