Drift Tengoku — May 1997
An archive project by Flock MFGNew issue alerts →
About this issue
1997 drift-car tests featuring a Skyline GTS25t and Soarer sit alongside an Osaka drift-scene report, driving techniques, troubleshooting and suspension setup. Other features cover an Ebisu Circuit beginner track day, the KAAZ Powerpot LSD and drift-team cars.
Page 134 — English draft translation
Clear road feedback! I've driven my 180SX hard on mountain roads and circuits for four years, persevering despite repeated crashes. Its bushes were getting tired, so I was interested in these bush spacers. Lucky to win! I borrowed a lift at my usual shop and installed them. The rear subframe is fixed at four points. First loosen the 17 mm nuts and insert spacers between it and the body. Then put the other spacers between the subframe and nuts and tighten. An impact wrench is useful: the front can be reached with a ring spanner, but the rear two nuts are recessed. Since body/subframe attachment is important, start tightening by hand before using the impact wrench. Don't overtighten. The work itself is simple...
...and instructions are supplied, so I wasn't worried. Now for the fun post-installation test. In town, slight vibration comes through the seat, especially on throttle. It feels as though the rubber bushes' vague movement has disappeared, connecting car and driver. On mountain roads, the first thing I noticed was a greater response to throttle on/off...
Captions and page details
Prospective buyers, check this!
...tested it!!
Won it...
...fitted it...
“Exciting Product-Testing Giveaway”
Drift Tengoku Vol. 4
Thanks to everyone who entered the product-testing giveaway. Here are the happy winners' reports! Even if you didn't win, don't sulk that it has nothing to do with you. Listen to these valuable opinions from actual users. Next time it could be your turn!
...report
Product tester...
Winners' comments
Part 1
Provided by Ikeya Formula Rear subframe...
Report: Fukuoka City, Fukuoka
...Bush Spacers
Hiroichi Yanagihara
REP REP PEPO
...the rear begins sliding a moment sooner. Even throttle response seems improved, making control easier. With transmission this direct, they should work even better on circuits than on ordinary bumpy roads. Thank you very much!
...than before. Also...
oooO
This is an important attachment, so work securely. I started the threads by hand before using an impact wrench, to avoid damaging them.
Installation is simple. Instructions are supplied, so with a lift anyone should be able to fit them...
...should be possible [Damaged fragment]
...I think.
PORT
The blurry photo is hard to read, but the upper spacer simply slips in after loosening the nut. There is no need to remove the subframe, so the work is convenient.
132
As you can see, the exterior is stock, but the suspension is thoroughly prepared: Crux adjustable suspension, pillow-ball tension rods and more...
REPOHT