Drift Tengoku — May 1997
An archive project by Flock MFGNew issue alerts →
About this issue
1997 drift-car tests featuring a Skyline GTS25t and Soarer sit alongside an Osaka drift-scene report, driving techniques, troubleshooting and suspension setup. Other features cover an Ebisu Circuit beginner track day, the KAAZ Powerpot LSD and drift-team cars.
Page 30 — English draft translation
2. Dropping a tire into a gutter and striking the tie rod. 3. A sudden forward weight transfer at full opposite lock, concentrating stress on the weakest part, the tie rod. Nobody does 1 or 2 deliberately, so there is no particular preventive modification. For 3, however, you can take precautions or prepare countermeasures. In any case, read this page carefully so a problem like this does not ruin an enjoyable day.
The number-one suspension problem for drift cars is a bent or broken tie rod. Unless it can be repaired, the car cannot be driven and must be towed. To become a knowledgeable drifter, learn preventive measures and sensible responses. If it breaks, you cannot drive. Carrying a spare may be best! Tie rods are essential parts transmitting steering input to the hubs and wheels. Failure can mean not just poor handling but inability to steer, with potentially disastrous results. The reasons tie rods bend or break include: 1. Striking a curb with a wheel, transmitting damage to the tie rod...
Bent tie rod First, straighten it Whatever caused it, a bent rod has to be dealt with. If the bend is slight and steering is unaffected, the article says to drive cautiously, though stopping before it worsens is best; remember to replace it after returning home. If it is bent enough to upset handling, it must somehow be straightened. Turn the bent side downward and use the car's...
Captions and page details
Troubleshooting, Part 2
Suspension trouble
“Full opposite lock...
...and then the tie rod snapped!”
in
Tie-rod damage
When it happens
What to do
AtoZ
...scissor jack to straighten it gradually. Alternatively, placing a jack beneath it and using the weight of the raised car may straighten it to some extent.
In my case... They used to break often, so whenever I went driving I always carried a spare tie...
Experience
...share their experiences
...rod. Recently I stopped using extreme negative camber...
...perhaps because of that, they break much less often now.
Fine-R: Hiroaki Osaki
When a junior friend's 180SX tie rod broke, we used the factory jack handle...
...the type that splits into two pieces at the T, as a splint, and cable ties...
...and tied it with wire as an emergency repair. Somehow...
Kazuhito Kameyama
...he apparently managed to get home.
Kyodo Fushin [Team name]
With a bend this severe, precise steering is impossible. For the illustrated repair, rotate the bent section downward (the center of the tie rod has flats for a wrench), then apply pressure with a scissor jack to straighten it.
Text [Isolated character]
PCS
OCL
Already... [Fragment]
...isn't it. [Sentence-ending fragment]
44
28
Snap!