Drift Tengoku — November 2006

Drag a corner or click a page to turn it

An archive project by Flock MFGNew issue alerts →

/ 284

About this issue

Bonnet design and modification take center stage, with carbon and FRP options, cooling comparisons, ducting, fitment, and DIY work. Other features cover a rear-wheel-drive GC8 Impreza conversion, Japanese drift builds, and American 240SX, RX-7, and 350Z projects.

Browse all magazines

Page 170 — English draft translation

58.

Factory GT-R pumps, BNR32/BCNR33/BNR34, use a roller-vane design. Rollers contact the housing as it turns, producing the whine. CA/RB pumps share the design but lower output means less noise. SR/1JZ pumps use cascade design, almost silent regardless of delivery; many aftermarket high-capacity pumps do too. Aftermarket doesn't automatically mean noisy [printed technical explanation].

Captions and page details
2.

Problems building a drift car?

1.

Want an SR swap into HCR32 or C33! Question from Dori Dori Mesh.

3.

Experts in the field give clear answers!

5.

I'm planning a new drift car with an SR engine, choosing between a favorite C33 and an R32…

6.

[Heading fragment damaged.]

8.

The bigger concern is the SR swap itself. First, transmission mount/bracket: C33 and R32 body…

4.

…or the more competitive HCR32? I'm undecided.

7.

…body-side shapes differ; which transmission mount and bracket should hold the SR transmission?

12.

Second: which driven gear/speed sensor should I use…

9.

…should I adapt? I've heard CA parts — is that wrong?

18.

…please!

13.

[Heading fragment.]

11.

Third: does anyone offer an HCR32 conversion wiring harness?

15.

Please mention other precautions too.

10.

…is it?

16.

Also, editors, past parts-adaptation and testing…

14.

…could you make a book collecting old adaptation and parts-test articles? Things once unimportant now matter, or I forget how they worked. I'd love a book.

17.

Researching the correct brake-bleeding order was eye-opening. We'd always said farthest from the master cylinder first, but that's not universal. A reminder we learn every day!

19.

There isn't just one method!

22.

Answer: Drift Tengoku editors. Shops said the transmission mount…

21.

…use a mount for the transmission being fitted, with modified or adapted factory brackets. Hard to describe precisely: compare brackets from related cars; reversing or drilling often suffices.

24.

Fuel-pump sound is quiet… Anonymous reader's question

23.

RB20 transmission driven gears are often used, though the speedometer reads slightly low. HCR32 five-speed automatic gear apparently gives less error. We found no shop using a CA gear…

28.

I'm a Nagano drifter with a JZX90 Chaser…

25.

…so that remains uncertain.

27.

…with JZX100 face, upgraded turbo and GT-R pump, originally stock injectors. Presumably tuned, but the pump sounds quiet. Why?…

26.

Garage… [shop name damaged], 046-244… sells an HCR32 conversion harness…

29.

…1283, for ¥50,000. Only for people able to solve HICAS, ABS or air-conditioning faults by telephone advice — electrical/car knowledge and a multimeter required…

32.

Recently fitted 2JZ injectors, using e-Manage, but…

31.

…haven't retuned since the injector change. I want to hear that pump noise!

30.

…apparently.

34.

Tourer V pumps are hard to hear!

33.

An SR20 bellhousing and clutch operating cylinder allow an RB20 transmission on an SR20. Retaining the RB20 driven gear avoids speedometer error and keeps the shifter in its factory position. RB20 gearboxes are apparently stronger than SR20 ones [printed FAQ explanation].

37.

Answer: Ono, Power Enterprise

36.

Operating sound and vibration travel through the metal bracket and resonate in the fuel tank…

35.

…noise. Even with a GT-R pump, factory-style rubber vibration/sound insulation may keep it quiet. That can indicate careful installation.

39.

Unlike Nissans' under-trunk tanks, the Tourer V tank sits behind the rear seat…

38.

…the tank behind the rear seat makes it quieter still with the interior installed.

44.

To increase noise, the printed answer suggests removing insulation and attaching the pump directly to its bracket…

43.

…attach with a hose clamp [continuation of printed noise discussion].

40.

Poor brake feel is worrying!

45.

If it should be noisy but isn't, there may be a pump fault…

42.

…if the car runs badly or won't rev, check fuel pressure. For a Tourer V with GT-R pump, the printed answer gives 2.5 kg/cm² ignition-on pressure and around 3.5 at 1 kg/cm² boost as normal.

41.

Question from Top Gun

49.

Previously you helped Top…

48.

This time poor braking worries me, especially in an emergency…

47.

…Gun from Aichi, previously asking about a GT-R pedal. Still seeking a good one to fit.

46.

First press feels weak and gradual; a second finally bites. Some pad material remains and no fluid leak. Is it ABS?

52.

What else could cause it? Please suggest a solution…

51.

Car: 1993 HCR32 Type M four-door manual, with ABS. Please advise.

50.

…please.

53.

Different symptoms mean different causes!

57.

…Maruta.

55.

Answer: Marutagoya

56.

Broadly two types of poor-braking symptoms…

54.

…checks depend on the symptoms.

60.

First: initially little resistance, but repeated pedal presses produce…

59.

…pedal resistance and braking appear: often air in the fluid or master-cylinder trouble. The printed answer recommends thorough bleeding, then master-cylinder replacement if unchanged.

63.

Left: insulated factory-style pump. Right: direct bracket contact to increase noise; metal hose clamps may increase it further [printed caption].

62.

Second: pedal initially very hard, becoming lighter with repeated presses…

61.

…a lighter pedal and braking: inspect the engine-to-booster hose for cracks/air leaks, then the booster if no hose fault [printed answer].

64.

Printed ABS note: after caliper bleeding, the ABS unit also needs bleeding. HCR32s vary by year in bleed-plug provision; without one, the article says all unit pipe connections must be loosened to remove trapped air [historical workshop guidance].

65.

168