Drift Tengoku — November 2006

Drag a corner or click a page to turn it

An archive project by Flock MFGNew issue alerts →

/ 284

About this issue

Bonnet design and modification take center stage, with carbon and FRP options, cooling comparisons, ducting, fitment, and DIY work. Other features cover a rear-wheel-drive GC8 Impreza conversion, Japanese drift builds, and American 240SX, RX-7, and 350Z projects.

Browse all magazines

Page 27 — English draft translation

20.

Red: high pressure, slower airflow. Blue: low pressure, faster airflow. Designed using pressure-distribution maps too! This diagram shows a Z33 under airflow, but other models reportedly have similar distributions. Blue areas are places where an opening readily extracts air. The ducts near the windscreen were designed using measurements like these.

Captions and page details
1.

Bonnet

2.

From this angle you can see that each louver differs in angle and size. Those differences minimize air resistance. The raised section ahead of the duct creates a low-pressure area to help extract air.

3.

Bonnet ducts combine cooling and aerodynamics at a high level! The bonnet is molded dry carbon and weighs 7 kg. The price is an astonishing ¥1 million each. There is a huge central duct and a smaller one beside it—

4.

misme

5.

NISSAN

6.

nisn

7.

A lip at the duct edge mates precisely with the shroud surrounding the cooling core when the bonnet is closed. Sponge seals keep air from escaping through gaps.

8.

—for the radiator and power-steering cooler. The basic shape may not look unusual; the impressive feature is underneath, where the ducts connect to the cooling cores. Each deep duct mates closely to the shroud around its core. This ensures incoming air passes through the core and leaves through the bonnet duct without leaking into the engine bay—

10.

DuosTe

9.

GREAT

11.

BONNET!!

12.

—along the way. Notice the louvers and edge treatment: they manage airflow. With a simple open hole, the exiting air can create resistance at high speed and slow the car. Cooling requirements differ between summer and winter races, so the number of louvers is adjusted to balance cooling and aerodynamics.

13.

Even the bonnet hinges are dry carbon to save weight. We asked whether the bolts were titanium too, but they are ordinary steel. GT regulations allow titanium only in limited applications such as , connecting rods and valves. [Historical regulations as described in the article.]

15.

“This is the lightest option, and its simple structure makes it reliable.” It uses OMP R-clip-style bonnet pins [pin-type lettering damaged]. Simple and attractive!

14.

The GT300 Silvia follows the same basic thinking! DAISHIN SILVIA ’03 (S14). Carbon bonnet.

17.

RIDGESTONE

16.

DAJSHIN

18.

Using the pressure-distribution diagram on the left, exhaust ducts are placed where air escapes easily and intake ducts where air enters easily. The lengthwise bars reinforce the louvers. A duct near the windscreen admits air to cool the engine bay; that air leaves through another opening . This duct is fitted only to the RB26-powered car.

19.

Pressure-distribution diagram

21.

The Daishin Silvia that formerly competed in GT300 uses a wet-carbon bonnet, but its shape likewise avoids admitting airflow into the engine bay. The GT-R and Silvia share the concept of balancing cooling and aerodynamics—

23.

—together.

22.

25

24.

Reporting assistance: Nissan Motor Co., Ltd. / Nissan Motorsport International