Drift Tengoku — November 2006
An archive project by Flock MFGNew issue alerts →
About this issue
Bonnet design and modification take center stage, with carbon and FRP options, cooling comparisons, ducting, fitment, and DIY work. Other features cover a rear-wheel-drive GC8 Impreza conversion, Japanese drift builds, and American 240SX, RX-7, and 350Z projects.
Page 28 — English draft translation
Ducts create a route for airflow. Bonnet ducts serve two roles: admitting air and exhausting it. All three bonnet types tested here act as outlets for air entering through the front bumper and grille. By contrast, an FC3S or Impreza with a factory top-mounted intercooler uses its bonnet duct as an inlet. It is easy to understand why directing air onto a cooling core helps, but why does exhausting it matter? Simply, fresh air cannot enter unless existing air leaves. Engine-bay volume is fixed, so it must be continuously exchanged. According to NEKO’s Kaneko, air normally feels almost resistance-free, but at speed it can form a wall and deflect incoming flow. With a standard bonnet lacking ducts, air from the front bumper remains in the engine bay. Then—
—the radiator itself grows hotter, and cooler air cannot enter. More engine speed and higher road speed worsen the cycle. A ducted bonnet can improve cooling because it provides an exit for air coming in through the front. Quickly exhausting air after it passes through the radiator produces the cooling effect. Is any hole enough? Should the outlet sit immediately behind the radiator, above the very hot turbo/exhaust-manifold area, or at the rear? Thermal measurements should reveal each arrangement’s effect. We begin with the standard bonnet and explain the test.
Captions and page details
IECK!
CHEC
Thermal imaging of engine-bay temperatures
Do bonnet ducts really improve cooling?
Opening [fragment]
Comparing how duct openings and positions contribute to cooling
One big opening in the middle!
Openings on both sides!
Let us analyze the temperature changes visually!
Sharp openings front and rear! [playful heading wording partially damaged]
When buying an aero bonnet, duct shape and position are probably the biggest questions. Here, thermal imaging reveals how cooling differs with duct placement and how hot air moves inside the engine bay. We include results for the factory bonnet too; after seeing them, you may immediately want an aero bonnet!
Test outline: drive the rear tires on a [roller-device name damaged] and inspect engine-bay temperatures when coolant reaches 85°C. Then apply airflow and measure the time for coolant to fall to 75°C. Combined with temperature comparisons, this tests duct effectiveness. The fan simulates road speed of approximately 40–50 km/h.
Measurement point 1: hold 5,500 rpm until coolant reaches 85°C. Measurement point 2: run the blower until coolant falls to 75°C.
26
Photography: Masahisa Fujita