Drift Tengoku — November 2006

Drag a corner or click a page to turn it

An archive project by Flock MFGNew issue alerts →

/ 284

About this issue

Bonnet design and modification take center stage, with carbon and FRP options, cooling comparisons, ducting, fitment, and DIY work. Other features cover a rear-wheel-drive GC8 Impreza conversion, Japanese drift builds, and American 240SX, RX-7, and 350Z projects.

Browse all magazines

Page 29 — English draft translation

21.

What is thermography? Its formal name is infrared thermography. Infrared emissions vary with temperature; a thermal camera makes that invisible radiation visible. It measures temperatures emitted by objects, not gas itself, but the flow of gas can be inferred from the objects it heats. The Sony unit used here costs an astonishing ¥4 million! [Technical explanation translated from the magazine.]

24.

The standard bonnet without ducts allowed hot air to remain in the engine bay. Coolant temperature also fell more slowly than with the aero bonnets shown next. This indicates engine-bay temperature affects coolant temperature. Thermal images show heat collecting around the bonnet edges. Long-used small cooling modifications such as removing the bulkhead-side rubber seal or raising the rear of the bonnet may therefore work by letting at least some of that hot air escape. [Historical test interpretation, not independently verified advice.]

Captions and page details
3.

High temperature directly above the exhaust manifold

5.

(120.0)

7.

67.6

8.

60.6

9.

536

10.

46.6

11.

39.6

16.

256

17.

18.6

19.

116

18.

(-40.0)

23.

Test car: an S15 Silvia belonging to NEKO Corporation , with a three-layer aluminum radiator, oil cooler and stainless-steel exhaust manifold; a setup.

2.

The underside reinforcement pattern is visible

4.

Coolant temperature: 85°C

6.

Without airflow. Commentary by NEKO: the hottest location is directly above the exhaust manifold, at around 65°C. The multiple hot areas probably reflect different heat transmission through the insulation and reinforcement. Removing the insulation would spread high temperatures over—

14.

Coolant temperature

13.

85°C

12.

—a wider area.

15.

This heat source is the oil cooler

20.

With the factory bonnet, engine-bay temperature also affects coolant temperature. Air with nowhere to go overheats and heats the steel bonnet itself!

22.

[Minutes digit missing] min 9 sec

27.

(120.0)

28.

67.6

29.

80.6

32.

536

35.

46.6

34.

396

33.

High temperatures over the whole area

36.

32.6

37.

25.6

39.

18.6

38.

11.6

26.

Hot air is trying to escape around the edges

25.

75°C

31.

Coolant temperature: 75°C

30.

With airflow. Commentary by NEKO: the blower sends air into the engine bay, but because it cannot escape effectively, overall temperature rises and heated air spreads through the bay. Temperature also rises around the bonnet edges where the air tries to exit.

41.

Reporting assistance: NEKO Corporation

40.

27