Drift Tengoku — November 2006
An archive project by Flock MFGNew issue alerts →
About this issue
Bonnet design and modification take center stage, with carbon and FRP options, cooling comparisons, ducting, fitment, and DIY work. Other features cover a rear-wheel-drive GC8 Impreza conversion, Japanese drift builds, and American 240SX, RX-7, and 350Z projects.
Page 35 — English draft translation
The aim is resistance to opening. Racing cars use bonnet pins so officials can open the bonnet quickly in a fire or other emergency. A driver may be unconscious after a crash, so a release operated only from inside is unsuitable. Why add pins to a drift car already equipped with a factory lock? First is appearance: the race-car look has functional beauty—
—and looks good. Next is safety. Here the aim is to make accidental opening less likely. An impact may distort the bonnet or damage the factory catch. If unnoticed, the bonnet could open on a straight. With pins, it is secured at three locations, left, right and center, reducing that possibility. A lightweight FRP bonnet may also bulge when air gets underneath—
—so even D1 cars may use tape to secure it temporarily to the fenders on fast courses. Why not use pins alone, as racing cars do? On a road car, easily opened external pins create a theft concern, and protruding pins may also cause inspection problems, according to the article. Pins plus the original lock combine appearance, safety and road-equipment considerations into a drift-car style. [Historical 2006 discussion; not current regulatory guidance.]
Captions and page details
The bonnet has never opened unexpectedly!
Factory catch plus pins—
—a double lock for reassurance and safety!
Transplanting a hook allows use of the factory catch!
!
Open it all the way—
Kazunori Takeda, Nagomi . Takeda’s Chaser has an unknown-brand bonnet bought online without a hook. He sourced one from a dismantled car and bonded it to the bonnet with bodywork adhesive. He says it has never come off. [Owner’s historical modification.]
—to vertical!
Many different ways to support it!
Hold it open without the factory prop rod!
Bonnet-supporting tricks!
Some aero bonnets lack a mounting point for the stock prop rod. Retaining a gas strut intended for a steel bonnet can also exert enough force to crack FRP. Owners therefore often use alternatives to the original support.
As expected of a D1 car—
Even the bonnet prop is top quality!
Yamazaki props his Chaser bonnet with an umbrella. It cannot lift the bonnet completely, but apparently supports the light FRP panel. [Owner example shown in the magazine.]
Just the right length!
The Chaser competing in D1GP uses a Blue-Point hood prop, ¥6,090. This steel support is strong enough for a truck hood. Pressing its lever allows continuous length adjustment from 47 to 119 cm.
Ogawa wondered whether a bent, unusable strut brace could be repurposed and found it ideal for supporting his bonnet. Its end fits between the catch and radiator support, giving a stable hold. [Historical owner example.]
JWORN
Toshihiro Fujiki, Caddy Bros . Raising the stop on the bonnet hinge lets the bonnet open vertically on many cars. Depending on its shape, a corner may contact the body and prevent it going fully vertical—
An umbrella can support an FRP bonnet!
—on some models.
33