Drift Tengoku — November 2006
An archive project by Flock MFGNew issue alerts →
About this issue
Bonnet design and modification take center stage, with carbon and FRP options, cooling comparisons, ducting, fitment, and DIY work. Other features cover a rear-wheel-drive GC8 Impreza conversion, Japanese drift builds, and American 240SX, RX-7, and 350Z projects.
Page 36 — English draft translation
A satisfaction only a steel bonnet can offer! A stock bonnet is strong, but its universal design and lack of cooling ducts may disappoint. Why not modify it? The result is a unique custom part; if it goes wrong, then consider an aftermarket bonnet. Making your own ducts gives a fully bespoke result, but commercial ducts are attractive too. Placing them where you want may also improve cooling.
A clean finish takes time and effort. Even Tanaka of Japan Craft, who demonstrates the work, needs a full day if filler work is included. We learn two approaches: neatly integrating a universal duct and fabricating a duct from scratch. Tanaka aims to make the modification look factory-made. Moving gradually from fiberglass-reinforced filler to finishing filler shows a body shop’s skill. No welding is needed, making the job tempting even without welding equipment or experience. It may inspire you to blend in a universal duct rather than simply riveting or screwing it on. Make ducts from scratch and you may lose interest in aftermarket FRP bonnets!
Captions and page details
Want more cooling? Open a hole!
The factory bonnet is an unlimited canvas!
Steel-bonnet supremacy
Modifying a steel bonnet
Having a shop do it costs at least ¥50,000 in labor!
Even without money for an aftermarket bonnet, you can obtain ducts and individual looks. Do not fear modifying the factory steel bonnet. The following pages introduce steel-bonnet work, beginning with duct installation.
Mr. Tanaka
Japan Craft representative
Bodywork and paint
Mr. Kadekaru
Universal duct catalog
Install wherever you like!
A rain cover protects against incoming rainwater! Universal duct.
A large duct releases hot air! Outlet Duct No. 1. Price: ¥15,750. J-Blood, 025-524-5066.
Can also be used as a dummy duct!
J-Blood
Outlet Duct No. 2. Price: ¥15,750. J-Blood.
Three-dimensional design!
Kazama
FRP bonnet duct
MASA
j-blood
Price: ¥13,440. Kazama Auto Service.
Type 1
Telephone: 025-524-5066
048-745-2026
Price: universal ducts ¥41,790. MASA [brand lettering damaged], 058-274-8806. The demo car has a pair fitted diagonally, widening toward the rear. Sold as a left/right set; OCR gives dimensions of 35 × 65 mm, but the digits/units appear incomplete. Dedicated rain covers prevent water entering the engine bay.
Rain cover: ¥12,600
Designed to release hot air after it passes through the radiator, through the bonnet’s center. Size: 400 × 700 mm [first dimension label damaged]; duct depth 70 mm. Aluminum mesh is bonded into it.
The raised duct has a flat mounting surface and can be fitted without cutting the bonnet as a dummy. The compact size is 300 × 530 mm [first dimension label damaged], with extended outer sides.
A central divider and lines extending from the rear emphasize the sculpted design. Mounting areas accommodate rivets or tapping screws, allowing a large central outlet for engine-bay heat.
34
Photography: Hiroki Iwashima