Drift Tengoku — November 2006
An archive project by Flock MFGNew issue alerts →
About this issue
Bonnet design and modification take center stage, with carbon and FRP options, cooling comparisons, ducting, fitment, and DIY work. Other features cover a rear-wheel-drive GC8 Impreza conversion, Japanese drift builds, and American 240SX, RX-7, and 350Z projects.
Page 42 — English draft translation
Captions and page details
Buy a stock-shaped FRP bonnet to make your own design!
made a similar modification, for a different reason. Nismo reinforced engine mounts raised the engine so the bonnet would no longer close.
AES
Takashi Fukuda, Quick . Bonnet: unknown.
Kiyoto Mukai, Rogue K
Garage S
Bonnet fitted
The cam cover interferes with the bonnet!
Mukai’s 180SX has an S14 engine swap. The S14’s NVCS makes one end of its cam cover taller than the PS13 engine’s, causing interference that prevented the bonnet closing. Cutting the bonnet where it touched allowed it to close properly.
Simply bolting on an aftermarket part is only the beginning!
Get 100% from your bonnet
He bought a stock-shaped FRP bonnet specifically to modify it, adding a large central duct. He wanted FRP but could not find a style he liked. The sharp shape looks excellent.
Hiromitsu Yamamoto, S.T-tomonokai . Bonnet: YSR.
FRP Hood
An FRP bonnet for a 20-series Soarer is rare enough, says Yamamoto, but he is proud of this unique shape. It was on the car when he bought it, so he cannot judge the cooling improvement. Other 20-series Soarer drift drivers envy it.
Tell us why—
—please!
—you modified it—
[Isolated linking syllable: の]
23
Keep the duct fins from flying off! Naoki Nakamura, Burst.
D-MAX
Bonnet fitted [damaged label]
Nakamura says the rear duct fins on D-MAX bonnets can come loose. The writer has also noticed missing fins. Their rivets can loosen with vibration, so these fins and stays have been refastened with tapping screws. [Historical owner observation.]
40