Drift Tengoku — November 2006
An archive project by Flock MFGNew issue alerts →
About this issue
Bonnet design and modification take center stage, with carbon and FRP options, cooling comparisons, ducting, fitment, and DIY work. Other features cover a rear-wheel-drive GC8 Impreza conversion, Japanese drift builds, and American 240SX, RX-7, and 350Z projects.
Page 71 — English draft translation
Remove the chain tensioner; its nut size is incomplete in OCR: 1 mm. Compress and lock the removed tensioner (photo 3). Remove cam brackets with a 10 mm socket (photo 4). Follow the loosening sequence in photo 5, easing them gradually in about three passes. Arrange removed brackets so their positions and orientation remain identifiable (photo 6). [Historical procedure; damaged tool size not corrected by guesswork.]
Lift out the rocker arms, taking care not to drop the valve-top shims (photo 1). If repairing a dislodged rocker, check the shims and recover all broken fragments; missing pieces may be in the sump. Press each adjuster plunger with a finger: the article says replace if depression exceeds 1 mm. Move it sideways; replace if play is felt. Body-to-bore clearance OCR reads 0.007–0.004 mm [reversed/possibly damaged range, requires image confirmation]. [Historical procedure.]
Captions and page details
3
Remove the cams
Remove the crank-angle sensor with a 12 mm socket (photo 1). Pull it straight out gently and confirm the alignment marks match: the right-hand punched mark and [other mark description damaged]. Refit in this position (photo 2). [Historical workshop procedure.]
3
Sakigake! SR School!!
Check lash-adjuster condition
Remove each cam with its sprocket, one side at a time (photo 7). Cam-bracket tightening torque: 1.2 kg·m as printed in OCR; tighten in the reverse of the loosening sequence, in three passes. [Historical procedure; specifications should be checked against the source image.]
4
Instructor
A torque wrench is essential! Careless assembly can destroy an engine!
Space is limited, so beginners will probably—
—beginners may find many details unclear. If this level of work leaves you confused or you lack the tools, it may be better to leave it to a professional. Mistakes can cause engine trouble.
3
At minimum, be able to use a torque wrench and understand the engine—
—understand the engine’s basic operation. These two—
—both requirements are essential. If compression top dead center is unfamiliar, begin by learning it. Once you can do this, changing cams is straightforward.
—the lock—
—engage it
Drift Tengoku has thought of a very specialized subject in lash-adjuster replacement—
—rocker— [fragment]
A faint horizontal contact mark is normal. If it runs diagonally or is a scratch, replacement is necessary. [Opening text damaged.]
—indeed. Many cars make noise from deteriorated adjusters. Leaving them can damage cams and rockers, increasing repair costs. Be particularly careful when high-lift cams mean frequent high-rpm use.
Press
Turning the crank after assembly releases the tensioner lock automatically, but the article says using a flat screwdriver to release it during assembly is more certain. [Historical procedure.]
—worn [fragment]
On the cam—
—scratches—
—like this [fragment]
6
5
0
3
Replacing lash adjusters and rockers without removing the cams. Cam removal requires torque-wrench work, compression top dead center and chain—
For beginners—
DIY
10
6
2 [photo label]
8
—good news!
10
6
2
8
However, Nissan has a special tool for removing lash adjusters without removing the cams—
—alignment marks, adding difficult elements for beginners. Many may feel it exceeds their knowledge. Nissan’s special-tool method is also in the service manual. Shinkawa says he has never removed the cams for this job; he even made his own tool and works with WRC-mechanic-like speed.
6
5
0
I—
Always this method!
Mikami says that for replacing all of them, removing the cams—
6
—my own tools!
I even make—
—is quicker overall, and losing a flying shim is troublesome, says Mikami. But an amateur with time may find this alternative worth learning. Remove the cam cover, establish No. 1 compression top dead center, and use an extension bar from above to press the adjuster and assess—
—its condition.
Information and photographs: Shinkawa, Shinkawa-ryu by Mikami Auto .
The upper tool is Nissan’s valve-spring compressor, part KV10115400. Reportedly out of stock at publication, with a long lead time; around ¥10,000. The lower one is Shinkawa’s closely copied tool made from a modified flat screwdriver.
Leverage compresses the valve spring enough to withdraw the rocker arm. Two tools— [continues].
—use them skillfully.
69