Drift Tengoku — Legend of 180SX Vol.1, February 2015
An archive project by Flock MFGNew issue alerts →
About this issue
This special traces the Nissan 180SX through Japanese drift culture, from early Kyushu drivers and Yoshinori Koguchi’s landmark Ebisu runs to the revival of his car. It profiles influential drivers and their machines, recreates period builds, and covers 180SX tuning, buying advice, and specialist shops.
Page 40 — English draft translation
Captions and page details
First Model Revival Project
Koguchi 180SX
The modern S14 turbo setup…
…hinges on the intake and exhaust!
Here is a list of parts chosen to make the most of the turbo, even though this is not an exact replica…
We introduce the parts we used. If you want to build the same S14-turbo setup, use this as a reference…
…for your build!
Z32 stock airflow meter / Price: ¥35,595. The stock 180SX airflow meter cannot supply enough capacity to get the most from an S14 turbo. The larger Z32 stock meter is a common swap.
Koguchi 180SX: First Model Revival Project
Yashio Factory front pipe / Price: ¥21,000. We fitted a slightly older type. It is all stainless steel with an 80 mm main pipe. The current version follows the floor more closely and is also on sale for ¥21,000…
HKS Racing Suction Reloaded / Price: ¥54,600. This aluminum suction pipe maximizes intake efficiency. Since we used the Z32 stock airflow meter, we chose a model that connects directly to it. A version compatible with the stock air cleaner is also available…
Yashio Factory exhaust extension / Price: ¥39,000. This outlet pipe was designed to reduce exhaust back-pressure. It has high capacity, a 76.3 mm connection to the front pipe, and all-stainless construction.
…and is available for ¥21,000.
…is also available.
NISMO
High-capacity injector / Price: ¥14,175 each. With an S14 turbo, the stock 180SX injectors cannot supply enough fuel, so replacing them with the standard 550 cc injectors is essential…
Nismo sports clutch kit / Price: ¥90,300. The original Koguchi 180SX used Nismo Cerametal A, but we installed an updated clutch kit with Capax discs. It includes the clutch disc and cover, flywheel and release bearing. Excellent power transfer and controllability, and easy to use!
…that is essential!
Yashio Factory Super Silent muffler / Price: ¥58,000. This discontinued product was a bargain used item we found at Yashio. It is all stainless steel with an 80 mm main pipe. As the name suggests, it keeps volume down. The current product is the ground-clearance-friendly Silent Muffler V.
Yashio Factory Okachan Super Catalyst / Price: ¥39,800. For street driving, this is a must! In comparison tests with other sport catalysts, Okachan at Yashio says his design reduced power the least. It is designed for lowered cars while retaining ground clearance…
…that is the idea.
Interior
80%
SPACE
DRIVING
Replica accuracy
Faithfully recreated the installation of the added parts!
Additional gauges above the steering column: Omori 52 mm mechanical boost gauge / price: open
%
80
%
90
Replica accuracy
Center section of the dashboard
Exhaust-temperature gauge / price: open
Replica accuracy
Omori 52 mm mechanical oil-pressure gauge / price: open
BLITZ
Oil-temperature gauge
Five-point roll cage
Blitz DUAL-SBC SPEC R / Price: ¥52,290
Water-temperature gauge
Price: open
Replica accuracy
Price: open. A panel was added to the air-conditioning vent area to fit three gauges: oil pressure, oil temperature and water temperature, in that order. They faithfully recreated the layout from old photos. Since the original gauge panel could not be found, they made one from FRP. A hole was also cut below the stereo for the boost controller…
A boost gauge and exhaust-temperature gauge were mounted above the steering column. The original Koguchi car apparently used a 60-degree exhaust-temperature gauge and a Nismo full-scale speedometer. We could not copy that completely, but the overall feel is very close!
Safety 21 five-point roll cage / Price: ¥42,000. The replica uses a five-point Safety 21 cage made of 40 mm steel. Koguchi’s Safety 21 cage was lightweight chromoly. The company now sells its chromoly cage under the D1 brand; the five-point version for the 180SX…
The painstaking…
…it takes work, but…
It is not flashy, but any driver will appreciate it! Look closely at the photo. Despite the many added gauges and boost controller, the interior looks clean. Most parts are neatly recessed into the dashboard, which is probably why.
…that is what I think.
Even small parts, such as the half-open headlamp controller that could have been stuck on with double-sided tape, were deliberately recessed into the dash. You might think this is just an obsession with flush-mounted parts, but the point was not appearance: tape-mounted controls could come loose while driving…
…when you can…
“I’m glad it came out well!” / Interior work: Kato
…neatly…
For plastic interior work, they used a hot knife (a soldering iron with a utility-knife blade) and carefully trimmed away the material. The key to cutting clean holes is to take your time. Koguchi probably worked this way too.
The prices shown for these parts are from 2007. As of 2015, some parts had been discontinued or repriced.