Drift Tengoku — May 1997
An archive project by Flock MFGNew issue alerts →
About this issue
1997 drift-car tests featuring a Skyline GTS25t and Soarer sit alongside an Osaka drift-scene report, driving techniques, troubleshooting and suspension setup. Other features cover an Ebisu Circuit beginner track day, the KAAZ Powerpot LSD and drift-team cars.
Page 32 — English draft translation
...it can suddenly apply the brakes hard, which is dangerous too. Act early before a small problem causes a major accident. The cause is clear: insufficient strength. The bracket weld apparently is not strong enough, and an uprated clutch adds stress, making failure more likely. Drifting also uses clutch kicks as well as normal gear changes, placing more load on the bracket than ordinary driving. Once it begins to break, it will not heal; replacing the affected part is the only way to restore it. Before an important track day, check carefully whether the clutch pedal is moving toward the brake pedal...
In my case... I couldn't repair it there, so I drove home changing gears by matching engine speed. At traffic lights I stopped the engine, then put it in first and started it to move off. I haven't made preventive modifications since, but a pedal moving toward the brake is a warning. I went straight to a factory-parts supplier without hesitating. Since then I've tried to press the pedal gently! FUN & Junkie's: Miri Matsumura . It suddenly broke while climbing a hill. Luckily someone I knew was nearby and towed me to a shop. They reinforced the pedal bracket during the repair, and I haven't had the same trouble since. [Separate accounts; see printed layout]
Get into the habit of matching revs when shifting! Once it has broken, it cannot be repaired with glue. Accept that and think about getting home. The most conventional option is a tow, easy enough if you came with friends. If alone, calling JAF is one option, but the article also proposes clutchless shifting. This means changing gear without pressing the clutch. Selecting first to move off is difficult, but once moving, upshifts and downshifts can be managed. Motorcyclists may know the technique: match engine speed to the desired gear and engage it as the speeds synchronize. Until you get used to it the gears may grind, but it can be easier than expected. Drivers already accustomed to matching revs should manage it. Those who normally shift carelessly should practice proper shifts routinely so they are less helpless in such a situation.
Captions and page details
Troubleshooting, Part 3
Control-system trouble
“What on earth, the...
...clutch pedal!”
Clutch-pedal breakage
This is another common S13 problem. The clutch pedal gradually moves toward the brake pedal, then bends or breaks. Naturally, the clutch can no longer be operated.
If it moves right, be alert! Normally it seems unlikely, but this really does happen frequently on S13s. The clutch pedal gradually approaches the brake pedal, and if ignored the bracket breaks at its base, as though the weld has peeled away. A clean break when you press it is one thing, strange as that sounds. But if it catches the brake pedal...
2
...and replace it at the slightest sign. Prevention is better than waiting. While fitting a new part, adding weld reinforcement to weak areas beforehand is also a sensible approach.
x2=5 ·
Experience
...from experienced drivers
Junkie's: Yumi Murota
Vivian: Miyuki Sasaki
...reinforce it beforehand...
If replacing it anyway, reinforcing the new part before installation is another option.
When it happens
What to do
A toZ
...what on earth!
30