Drift Tengoku — May 1997

Drag a corner or click a page to turn it

An archive project by Flock MFGNew issue alerts →

/ 180

About this issue

1997 drift-car tests featuring a Skyline GTS25t and Soarer sit alongside an Osaka drift-scene report, driving techniques, troubleshooting and suspension setup. Other features cover an Ebisu Circuit beginner track day, the KAAZ Powerpot LSD and drift-team cars.

Browse all magazines

Page 34 — English draft translation

9.

...where the tire can hit the folded fender edge even though it clears during ordinary driving. The lip turns outward and its sharp corner cuts into the tire shoulder. In worse cases the tire pushes the entire fender upward and dents it. The tire is probably also repeatedly hitting the plastic inner fender liner. Rubbing a hole is one thing, but the liner can detach and get caught in the tire, which is troublesome. To avoid this, knowledgeable drifters who love low cars...

12.

...remove the fender liner from the outset and fold the protruding inner lip inward with a hammer. Done skillfully, this need not look untidy; some even say it makes the car look more like a proper drift machine. Drivers running absurdly large front wheels sometimes go further and hammer the entire fender outward into an overfender-like shape. A body shop can also do this work, so combining it with a planned full repaint is an option.

21.

Hammer it firmly! The fender edge is folded into an L shape so the liner can attach, perhaps also for manufacturing reasons. As the tire moves up and down, it can catch this area, especially near bolt holes. The article proposes flattening the lip from behind until it lies closely against the panel. Pliers can also flatten it, but for a neater finish, support the outside by hand and tap from behind with a plastic hammer. With luck the paint may not crack; if it does, use touch-up paint. Compared with the larger damage from tire contact, that seems minor. At the extreme, some people dent inward the inner bodywork that the tire hits at full steering lock, because a tire caught there can fail to return and cause a crash. Other options include raising ride height, increasing spring rates or using smaller tires. Which would you choose?

Captions and page details
4.

Troubleshooting, Part 5

3.

Bodywork trouble

1.

“How about this perfectly flush fender setup!” You think it looks great, then drive and hear scraping from the front. The tire gets shaved and the fender lip turns outward, causing considerable damage. With fresh paint and new tires, that really hurts.

2.

Fender lips are a lowered car's enemy! This is common among drift beginners. You may think your tire size and ride height cannot possibly touch the fender, but the car moves more than expected once driven—especially on a circuit...

5.

“Whoa!? The fender...

6.

...has rolled outward!”

8.

Tire-to-fender contact

7.

CASEO

10.

...even after a full repaint, driving can produce damage like this...

11.

Look at the front fender! Tire contact can inflict painful damage.

13.

Fender modification is essential for an exact flush fit. Put another way: if you lack the nerve to reshape the fenders, perhaps don't lower the car!?

16.

...tuning

15.

...measures...

14.

Preventive...

20.

The point is simply to create enough clearance

22.

...secure... [Damaged fragment]

27.

32

24.

If the liner mounting-hole area turns outward and hits the tire, damage can be severe. With new tires it would be utterly devastating.

26.

After removing the liner, firmly tap the lip with a plastic hammer. Fold a slightly wider area...

25.

...fold it over properly so you do not regret it later.