Drift Tengoku — November 2006
An archive project by Flock MFGNew issue alerts →
About this issue
Bonnet design and modification take center stage, with carbon and FRP options, cooling comparisons, ducting, fitment, and DIY work. Other features cover a rear-wheel-drive GC8 Impreza conversion, Japanese drift builds, and American 240SX, RX-7, and 350Z projects.
Page 224 — English draft translation
An RB25 delivering power at low rpm! The Laurel's weapon is its low-end-torque setup: RB25, …turbo and Poncams [turbo code damaged]. At a little over 300 PS it has slightly less power than her previous 180SX, but the old SR required over 4,000 rpm to drift. This setup maintains a drift easily from 2,500 rpm, accelerating her improvement. Tomei Powered cam sprockets, matching the cams, also bias valve timing toward low-rpm performance.
Modified knuckles help speed improvement! The light-blue section is the shortened knuckle. “Spins dropped dramatically after fitting them,” she says. They also reduce late countersteer return and help recovery from spins, letting her enjoy open practice without pressure from following cars. The rear has five-stud hubs but the front remains four-stud because she doesn't want to lose these knuckles. A friend gave them to her, so she doesn't know the manufacturer.
Captions and page details
On her fourth car, after years of struggle…
…her talent finally blossomed!
RB25 specification
It's why she improved!
Because it's a Laurel…
e3!
A full bucket seat…
Absolutely essential!
Consistent driving position matters! She has used the BRIDE ZETA since her 180SX days. Besides holding her securely, it always puts her in the same position so she can concentrate on driving. She removed the handbrake cover because it's easier to grip that way.
[Damaged sidebar label.]
The secrets to improvement are here!
222