Drift Tengoku — November 2006

Drag a corner or click a page to turn it

An archive project by Flock MFGNew issue alerts →

/ 284

About this issue

Bonnet design and modification take center stage, with carbon and FRP options, cooling comparisons, ducting, fitment, and DIY work. Other features cover a rear-wheel-drive GC8 Impreza conversion, Japanese drift builds, and American 240SX, RX-7, and 350Z projects.

Browse all magazines

Page 38 — English draft translation

11.

—but I forgot to fasten the pins and had the bonnet open while driving several times. That usually chips a corner, which looks awful. Now I only use stock bonnets: they are tough. My modifications mix cooling, showmanship and humor. The rear duct lowered coolant temperature about 10°C; the big central one adds little cooling, so it is for show. The pipe also makes more noise here and attracts attention. I tape the bonnet pins when driving, copying a D1 video. It confirms the locks are fastened and helps prevent unexpected opening. [Owner’s account.]

30.

I made the ducts five years ago. Even with a Koyo three-row copper radiator and two electric fans, two ten-minute sessions at Meihan sent coolant over 120°C, so I cut the bonnet. There were no ducted C33 bonnets then, and with an SR20 swap the holes in commercial FRP bonnets would be in the wrong places. Now two ten-minute runs do not send coolant above 100°C. Pleased with the result, I added ducts to release turbo heat. You can see heat shimmer while driving, so I think they work. [Owner’s account.]

Captions and page details
1.

We—

7.

Supremacy

6.

Supremacy [fragmented heading]

2.

Steel-bonnet modification

3.

—are—

5.

—believers

4.

These steel-bonnet enthusiasts’ creations are fully bespoke: no two in the world share the same shape. Anyone who dismisses them as merely cutting holes and adding ducts cannot appreciate the effort and individuality involved. Hear the passion of owners who express themselves through their bonnets! Murakami’s Silvia.

8.

Factory [stylized lettering damaged]

9.

I like steel’s rigidity! The holes are half function, half show—

10.

—half show.

12.

pro

13.

I have used an FRP bonnet—

14.

Release heat from the turbo and manifold—

16.

—outward

15.

The small, attractive ducts come from a 1980 Renault. Located behind the exhaust manifold, they reportedly exhaust heat effectively and lowered coolant temperature 10°C.

17.

A ¥9,800 Yahoo Auctions duct adds visual impact. He bought the central duct at auction; it was less effective for cooling than the rear ducts. He calls it a styling item and says it did not cool as much as expected. A simple installation: cut, cover and secure [fastener wording damaged].

19.

Owner

18.

Keiichi Murakami, Toyama; Sad Magic . He believes bonnet rigidity also contributes to body rigidity, linking the two hinges with a stiff material. Avoiding cracks or peeling is another reason he shuns FRP. [Owner’s view.]

20.

Bonnet pins are always taped! The factory catch is removed, so pins secure the bonnet. They have never come unlocked, but he copies leading D1GP cars by taping over them to help retain the locks.

21.

More wastegate sound! His Silvia uses a modified stock manifold with an external wastegate . A bonnet opening makes its atmospheric discharge louder. In rain he covers it with a brake-cleaner cap, he says.

23.

The rear duct releases turbo heat. The left-side one is fitted for visual balance—

25.

Engine swap [fragment]

22.

The top of the fan shroud is cut away to let air leave after passing through the radiator. The duct was bought by mail order and fixed with FRP.

24.

—with the other side.

27.

Prevent turbo overheating!

29.

The fan shroud is cut too!

28.

Morimoto’s Laurel

36.

36

33.

Owner

31.

Katsunori Morimoto

35.

—member of Zest

34.

Resident of Hyogo—

32.

His hybrid turbo combines an S14 compressor side with a Pulsar turbo’s exhaust side. Until around last year he drove only on circuits, but recently he has also driven on the street.