Drift Tengoku — November 2006

Drag a corner or click a page to turn it

An archive project by Flock MFGNew issue alerts →

/ 284

About this issue

Bonnet design and modification take center stage, with carbon and FRP options, cooling comparisons, ducting, fitment, and DIY work. Other features cover a rear-wheel-drive GC8 Impreza conversion, Japanese drift builds, and American 240SX, RX-7, and 350Z projects.

Browse all magazines

Page 40 — English draft translation

Captions and page details
2.

Simply bolting on an aftermarket part is only the beginning!

1.

Get 100% from your bonnet

3.

Aero bonnets improve cooling and appearance, but are you satisfied with simply fitting one? A little ingenuity can make them better-looking and more functional. Here are familiar tricks and surprising discoveries on a range of interesting themes!

5.

A partial cut improves cooling efficiency!

6.

Without a fan shroud—

4.

[Fragmented heading repeats the fan-shroud discussion]

7.

—it will not cool properly! [Owner’s claim.]

8.

Tsuchikawa. Bonnet: Origin.

9.

After fitting the bonnet, the fan shroud sat below the duct and cooling did not improve much. Cutting the shroud to let radiator air leave through the duct reportedly lowered coolant temperature about 5°C. Silicone hose covering the cut edge looks good too.

10.

Atsushi Kuroi, Tinker

13.

Garage S

12.

Bonnet fitted

11.

Kuroi instead extended his shroud. If it contacts the bonnet, make it so it does not, he says. A coupling fan needs an enclosure to draw effectively; removing the shroud because it interferes sends coolant temperature up. His aluminum extension looks very neat. [Historical owner explanation.]

14.

This does look as though hot air can escape efficiently. Changing the radiator or using a mid-mounted intercooler can shift the airflow position away from ducts designed for the factory layout, so check alignment.

15.

A fan shroud—

17.

—is it better to have one?

16.

He also removed the factory bonnet catch. He cannot quantify its effect, but thinks removing such a large part may help. It also makes the front view look much cleaner.

18.

Hirotaka Sugimura, Tech

20.

JUN

19.

Bonnet fitted

21.

Here is the same angle with the catch fitted. Its plate is indeed large and becomes even more conspicuous with the grille removed.

22.

Directing air into the radiator matters more than the shroud!

23.

He says directing air properly onto the radiator matters more than having a fan shroud. He uses no shroud, but has a radiator cooling panel and removed the bonnet catch. After air hits the radiator, it exits through the ducts, he reasons. He reports no coolant-temperature problems. [Historical owner configuration.]